Jaws Blade
|
The original version of vacuum brazed cutting. Does almost everything that the Great White does. The Jaws will cut a variety of both ferrous and non-ferrous metals and do it at a much faster and safer rate than using abrasive wheels.
UNBELIEVABLE ON DUCTILE IRON! - Application: Steel, metal studs, ductile iron, rebar, plaster, wood, shingles, composite materials, RCP, and concrete. - 5mm Segment Height 
|
Diameter |
Width |
Arbor |
Part # |
4" |
.110 |
7/8"-5/8" |
T4JWS |
4.5 |
.110 |
7/8"-5/8" |
T45JWS |
5" |
.110 |
7/8"-5/8" |
T5JWS |
6" |
.125 |
DIA 7/8"-5/8" |
T6JWS |
7" |
.125 |
DIA 7/8"-5/8" |
T7JWS |
8" |
.125 |
DIA 7/8"-5/8" |
T8JWS |
9" |
.125 |
1"-20mm |
T9JWS |
10" |
.125 |
1"-20mm |
T10JWS |
12" |
.142 |
T12JWS |
|
14" |
.142 |
T14JWS |
|
16" |
.142 |
T16JWS |
|
18" |
.145 |
T18JWS |
|
20" |
.155 |
Value |
T20JWS |
Ductile Iron Blade
|
The Ductile Iron Blade does it all. This blade uses vacuum brazing technology along with diamond abrasive coating on the core to allow you to cut ductile iron three times faster than an abrasive wheel. This one blade will out last 75 to 100 abrasive wheels, with no down time of changing wheels because they have gotten to small. Much safer than abrasives, extremely fast, makes this blade a must have for all underground and utility contractors.
- Application: Ductile iron pipe and cast iron. - 4mm Segment Height with abrasive side coating
|
Diameter |
Width |
Arbor |
Part# |
12" |
.125 |
1"-20mm |
T12DI12 |
14" |
.125 |
1"-20mm |
T14DI12 |
16" |
.125 |
1"-20mm |
T16DI12 |
The Great White Blade
|
The Great White is the our next generation Jaws blade. The Great White uses vacuum brazed technology, with a superior high diamond concentration, and diamond layers to add longer life and superior cutting speed. This blade replaces the need for abrasive wheels completely, and outlasts them 100-1. Eliminate the fear of the blade fragmenting or watching your wheels shrink while you cut.
- Application: Scaffold, metal studs, rebar, PVC, pipe, angle iron limestone, roofing material. - 4mm Segment Height with abrasive side coating
|
Diameter |
Width |
Arbor |
Part# |
12" |
.146 |
1"-20mm |
T12NJWS |
14" |
.146 |
1"-20mm |
T14NJWS |
16" |
.146 |
1"-20mm |
T16NJWS |