Masonry Blades
Supreme - Wet/Dry 15mm Segment Height.
Application: Block, brick, and light concrete.
Equipment: Table saw and high speed saw.
This is not your grand fathers diamond blade. The El Diablo uses ribbed segment technology
to provide the user with super long life, and extremely fast cutting for block, CMU's, assorted bricks, and pavers.
| Model Number | DIA | Width | Arbor |
|---|---|---|---|
| TV12TAZ | 12" | .125 | 1"-20mm |
| TV14TAZ | 14" | .125 | 1"-20mm |
The Black Knight
Supreme - 10mm Seg Height
The Black Knight is your best option if all you cut is block or mortar joints. Split segment technology will give the operator tremendous life with good cutting speed on softer more abrasive materials. This blade works ideal on table saws and gas powered cut off saws.
| Model Number | DIA | Width | Arbor |
|---|---|---|---|
| T12KING | 12" | .125 | 1"-20mm |
| T14KING | 14" | .125 | 1"-20mm |
Large Diameter Segmented Blades
Supreme - 10mm Seg Height
Application: General purpose - Masonry, cured concrete, and mortar.
Equipment - Table saw, high speed saw, low hp walk behind.
An oldy but a goody. A mason contractors best friend. One blade does it all. Such as brick, block, pavers, assorted stones, and concrete roof tile. The ultimate in combo performance. Ideal for residential contractors.
| Model Number | DIA | Width | Arbor |
|---|---|---|---|
| T12110SGP20 | 12" | .110 | 20mm |
| T12110SGP120 | 12" | .110 | 1"-20mm |
| T12125SGP20 | 12" | .125 | 20mm |
| T12125SGP120 | 12" | .125 | 1"-20mm |
| T14110SGP20 | 14" | .110 | 20mm |
| T14125SGP20 | 14" | .125 | 20mm |
| T14125SGP120 | 14" | .125 | 1"-20mm |
| T16125SGP120 | 16" | .125 | 1"-20mm |
| T18125SGP1 | 18" | .125 | 1" |
| T20125SGP1 | 20" | .125 | 1" |
| T20140SGP1 | 20" | .140 | 1" |
Small Diameter Segmented Blades
Supreme -12mm Seg Height
Application: General purpose - masonry, cured concrete, and mortar.
Equipment: Angle grinder and circular saws.
The best blades money can buy for all of your masonry and concrete needs.
| Model Number | DIA | Width | Arbor |
|---|---|---|---|
| TI4SGP | 4" | .080 | 7/8"-5/8" |
| TI45SGP | 4.5" | .080 | 7/8"-5/8" |
| TI5SGP | 5" | .080 | 7/8"-5/8" |
| TI6SGP | 6" | .080 | 7/8"-5/8" |
| TI7SGP | 7" | .095 | DIA 7/8"-5/8" |
| TI8SGP | 8" | .095 | DIA 7/8"-5/8" |
| TI9SGP | 9" | .095 | DIA 7/8"-5/8" |
| TI10SGP | 10" | .095 | 7/8"-5/8" |
