The Ninja

Have you ever had a blade cut real slow, melt a brick, shoot sparks, jump out of the cut, bounce, drift, or even stop cutting?

The NINJA Blade is your answer for any hard material you have either cut or will cut. No material is to hard or dense for the NINJA. Your time is money! Do not accept copies or knock offs. There is only one Ninja, and we have it.
- Application: The hardest bricks, pavers, stone, reinforced concrete, refractory bricks..
- 10mm Segment Height
Diameter
Width
Arbor
Part#
12"
.125
1"-20mm
​T12SWG12
14"
.125
​1"-20mm
​T14SWG12
16"
.125
1"-20mm
​T16SWG12
20"
.125
1"
T20SWG12

Gold Turbo Blade

The Gold Turbo is the benchmark of blades for cutting the hardest stones such as granite, quartzite, bluestone and flagstone. We use a select grade of diamond to allow the operator to get a very fast, chip free, cut on the hardest materials without harming the stone.

- Application: Granite, Engineered Stone, and Hard Materials
- 8mm Segment Height
Diameter
Width
Arbor
Part#
4"
.080
7/8"-20mm-5/8"
T4YTG080
4.5"
.090
7/8"-20mm-5/8"
T45YTG090
5"
.090
7/8"-20mm-5/8"
​T5YTG090
6"
.090
7/8"-20mm-5/8"
T6YTG090
7"
.090
Universal
T7YTG090
8"
.090
T45YTG080
​T8YTG090
9"
.090
​7/8"-20mm-5/8"
T9YTG090
10"
.090
​7/8"-20mm-5/8"
T10YTG090

Tornado Blade

The Blue Tornado is your best bet if you're working with stone. The Blue Tornado loves bluestone, granite, limestone, and flagstone. It can be used on any type of hard material but loves the hard stuff. A perfect blade for installers or fabricators of stone related products.

- Application: Granite, hard material, fast cutting.
- 9mm Segment Height
Diameter
Width
Arbor
Part#
4"
.080
7/8"-5/8"
​T4TORS
4.5"
.080
​7/8"-5/8"
​T45TORS
5"
.080
7/8"-5/8"
​T5TORS
6"
.090
7/8"-5/8"
​T6TORS
7"
.090
7/8"-5/8"
​T7TORS
8
.090
​DIA 7/8"-5/8"
​T8TORS
10"
.090
DIA 7/8"-5/8"
​T10TORS
12"
.125
DIA 7/8"-5/8"
​T12TORS
14"
.125
​1"-20mm
​T14TORS